师资队伍

当前位置: 首页 -> 师资队伍 -> 正文

佟文明

日期:2018年07月19日阅读次数:


佟文明,教授,博士生导师

电话:024-25496129

邮箱:twm822@126.com

教育及工作经历:

2003-9至-2007-7,沈阳工业大学电气工程及其自动化专业学习(专业第一名);

2007-8至2012-6,沈阳工业大学电机与电器硕博连读(师从唐任远院士)。

2012-9至2023-4,沈阳工业大学国家稀土永磁电机工程技术研究中心,讲师、副教授、教授;

2023-5至2025-2,沈阳工业大学国家稀土永磁电机工程技术研究中心分管日常工作的副主任兼电气工程学院副院长。

2025-3 至今,沈阳工业大学电气工程学院执行院长兼党委副书记,国家稀土永磁电机工程技术研究中心分管日常工作的副主任

教学情况:

曾为电气工程及其自动化专业本科生、“任远-实验班”讲授《电气控制及PLC技术》、《电机测试技术》;为电气工程研究生讲授《交流电机矢量控制》;为留学生讲授《Permanent magnet motor technology》。

研究领域及研究方向:

主要从事高品质稀土永磁电机系统研究。具体研究方向包括:1、非晶合金永磁电机;2、飞轮储能、空压机等高速永磁电机;3、大型工程机械低速直驱永磁电机系统;4、人形机器人永磁电机关节模组;5、半导体设备真空运行永磁无框电机等。

科研项目:

1、国家自然科学基金优秀青年基金:高效能轻量化低振动永磁电机。(主持)

2、国家科技重大专项(科技创新2030):大功率工业动力系统用高效磁动力装置。(课题主持)

3、中央军委装备预研项目:非晶磁阻型高速起动发电机系统技术。(课题主持)

4、辽宁省杰青项目:大功率飞轮储能高速永磁电机应用基础研究。(主持)

5、霍英东教育基金会青年教师基金:基于低损耗软磁合金材料的新型高频轴向磁通混合励磁电机机理研究。(主持)

6、兴辽英才计划:高速非晶合金永磁电机关键技术研究。(主持)

7、沈阳市中青年科技创新人才支持计划:新能源汽车氢燃料电池用超高速非晶合金永磁电机关键技术研究。(主持)

8、企业合作项目:中国电子学会-腾讯Robotics X犀牛鸟专项研究计划。(主持)

9、企业合作项目:高精度、低脉动、高过载永磁伺服电机设计。(主持)

10、企业合作项目:飞轮储能高速永磁电机优化设计。(主持)

11、企业合作项目:复合励磁电机电磁分析技术、电磁软件开发及发电机与整流系统匹配性研究。(主持)

12、企业合作项目:高速永磁电机与低速永磁电机研发。(主持)

13、企业合作项目:芯片机械臂无框永磁直驱电机研发。(主持)

14、企业合作项目:XDN-XD-3轮足专用电机研发。(主持)

15、企业合作项目:人形机器人永磁驱动电机研发。(主持)

16、企业合作项目:轻量化协作机械臂小型驱动电机研发。(主持)

代表性论文与著作:

[1]W. Tong, L. Sun, S. Wu, et al, Analytical Model and Experimental Verification of Permanent Magnet Eddy Current Loss in Permanent Magnet Machines with Non-Concentric Magnetic Poles[J]. IEEE Trans. Ind. Electron., 2022, 69(9): 8815-8824.

[2]W. Tong, S. Wu and R. Tang, Totally Enclosed Self-Circulation Axial Ventilation System Design and Thermal Analysis of a 1.65-MW Direct-Drive PMSM, IEEE Trans. Ind. Electron., 2018, 65(12): 9388-9398.

[3]S. Wu, W. Tong*, W. Li, et al. Electromagnetic Vibration Analysis of High-Speed Permanent Magnet Synchronous Machines with Amorphous Metal Stator Cores Considering Current Harmonics [J]. IEEE Trans. Ind. Electron., 2020, 67(12): 10156-10167.

[4]W. Tong, J. Li, S. Li, S. Wu and R. Tang. Improved Core Loss Calculation Method and Experimental Verification for High-Speed PMSMs With Amorphous Metal Cores Considering Edge Degradation and Stacking Effects[J]. IEEE Trans. Ind Electron.,2024,12(05):1-10.

[5]W. Tong*, H. Luo, D. Cai, and S. Wu. Improved Accurate Subdomain Model for Magnetic Field Analysis of Surface-Mounted PMSMs with Modular Stator Cores Considering Tooth-tips Saturation Effect and Assembly Clearance[J]. IEEE Trans. Energy Convers , 2025, Early Access Article.

[6]W. Tong, D. Cai and S. Wu. An Improved Subdomain Model for Optimizing Electromagnetic Performance of AFPM Machines[J]. IEEE Trans Ind Appl., 2024,8(23):8745-8754.

[7]S. Li, W. Tong*, S. Wu and R. Tang. General Analytical Model for Electromagnetic-Thermal Bi- Directional Coupling of IPM Motors in Electric Vehicles Considering Different Rotor Structures[J]. IEEE Trans. Veh. Technol., 2024,6(07):16470-16480.

[8]W. Tong*,J. Lu, M. Hou, and S. Wu. Improved 2-D analytical model for rotor eddy current loss of HS PMSMs with rotor retaining sleeve based on accurate subdomain method [J]. IEEE Trans. Energy Convers , 2023, 8(02):334–343.

[9]W. Tong*, S. Li, R. Sun, et al. Modified Core Loss Calculation for High-Speed PMSMs with Amorphous Metal Stator Cores[J].IEEE Trans. Energy Convers., 2021, 36(1): 560-569.

[10]S. Li, W. Tong*, S. Wu and R. Tang. General Analytical Model and Experimental Verification for Mechanical Stress of High-Speed Interior Permanent Magnet Motors Considering Modified Rotor[J]. IEEE Trans Ind Appl., 2024, 10(02): 1-10.

[11]W. Tong, S. Wang, S. Dai, et al. A Quasi-Three-Dimensional Magnetic Equivalent Circuit Model of a Double-Sided Axial Flux Permanent Magnet Machine Considering Local Saturation, IEEE Trans. Energy Convers., 2018, 66(12): 9388-9398.

[12]W. Tong, L. Sun, M. Hou, et al. Analytical Modeling for Rotor Eddy Current Loss of a Surface-Mounted PMSM with both Non-Ferromagnetic Conductive Retaining Sleeve and Shielding Cylinder[J]. IEEE Trans. Energy Convers., 2022, 37(2): 832-843.

[13]W. Tong, R. Sun, S. Li, et al. Loss and Thermal Analysis for High Speed Amorphous Metal PMSMs Using 3-D Electromagnetic-thermal Bi-directional Coupling [J]. IEEE Trans. Energy Convers., 2021,36(4):2839-2849.

[14]S. Li, W. Tong*, M. Hou, et al. Analytical Model for No-Load Electromagnetic Performance Prediction of V-shape IPM Motors Considering Nonlinearity of Magnetic Bridges[J]. IEEE Trans. Energy Convers., 2022, 37(2): 901-911.

[15]W. Tong, S. Li, X. Pan, et al. Analytical Model for Cogging Torque Calculation in Surface-Mounted Permanent Magnet Motors With Rotor Eccentricity and Magnet Defects[J]. IEEE Trans. Energy Convers., 2020,35(4): 2191-2200.

[16]W. Tong, S. Dai, S. Li, et al. Modeling and Analysis of Axial Flux Permanent Magnet Machines With Coexistence of Rotor Radial Deviation and Angular Eccentricity[J]. IEEE Trans. Energy Convers., 2020,35(4): 2181-2190.

[17]W. Tong, Y. Wang, R. Sun, et al. Simulation and Experimental Study on No-Load Loss Distributions of an IPM Motor Under the Conditions of Both Sinusoidal Supply and Converter Supply [J]. IEEE Trans. Magn., 2018, 55(11):1-6.

[18]W. Tong, R. Sun, C. Zhang, et al. Loss and Thermal Analysis of a High-Speed Surface-Mounted PMSM with Amorphous Metal Stator Core and Titanium Alloy Rotor Sleeve [J]. IEEE Trans. Magn., 2019, 55(5):1-4.

[19]W. Tong*, S. Dai, S. Wu, et al. Performance Comparison between an Amorphous Metal PMSM and a Silicon Steel PMSM [J]. IEEE Trans. Magn., 2019, 55(5):1-5.

[20]W. Tong*, H. Wei, S. Li, et al. A novel multi-objective optimization method for the optimization of interior permanent magnet synchronous machines [J]. IET Electric Power Applications, 2021, 15(3): 359-369.

专利授权:

[1]佟文明;吴胜男;贾建国, 等. Permanent magnet motor with air and water mixed cooling system: US18395491[P]. 2024-10-01.

[2]佟文明;吴胜男;蔡德艺, 等. Stator liquid cooling structure and stator structure of stator yokeless disc motor: US18331319[P]. 2023-12-26.

[3]佟文明;田飞;贾建国,等. 一种具有复合冷却结构的轴向磁通永磁电机:ZL 202411305885.6[P]. 2024-12-13.

[4]佟文明;牛瑞军;吴胜男,等. 一种具有复合冷却结构的电机:ZL 202311770108.4[P]. 2024-06-18.

[5]佟文明;汪晓强;吴胜男,等. 一种永磁电机复合定子水冷结构:ZL 202211679959.3[P]. 2023-04-07.

[6]佟文明;汪晓强;贾建国,等. 一种带有高效率空水混合冷却系统的永磁电机:ZL 202211680595.0[P]. 2023-06-20.

[7]佟文明;吴胜男;马雪健,等. 一种定子无磁轭式盘式电机的定子液冷结构及定子结构:ZL 202210678869.6[P]. 2023-03-21.

[8]佟文明;李世奇;吴胜男. 一种V型内置式永磁同步电机齿槽转矩解析方法:CN202110601316.6[P]. 2023-05-23.

[9]佟文明;孙鲁;吴胜男,等. 永磁体涡流损耗的优化方法:ZL 202011011184.3[P]. 2023-04-25.

[10]佟文明;孙鲁;张红奎,等. 带有屏蔽层的高速永磁电机转子:CN201911392574.7[P]. 2022-01-18.

社会兼职及获奖荣誉:

社会兼职

1、中国电工技术学会永磁电机专委会副主任委员

2、非晶节能材料产业技术创新联盟副理事长

3、中国电器工业协会微电机分会第九届理事会理事

4、中国电工技术学会青年工作委员会委员

5、中国电工技术学会储能系统与装备专业委员会委员

6、中国金属学会非晶合金分会第二届委员会委员

7、《沈阳工业大学学报》编委会委员

8、《微特电机》编委会委员

9、电机学科知名英文期刊CES TEMS Associate Editor

获奖荣誉

1、2025年第50届日内瓦国际发明展金奖。

2、2022年获辽宁省科技进步一等奖。

3、2021年获中国机械工业技术发明一等奖。

4、2022年获辽宁省研究生教学成果特等奖。

5、2024年获辽宁“最美青年”。

6、2022年获辽宁省高校“校园先锋示范岗”。

7、2022年获第四届沈阳市最美科技工作者。

8、2024年中国电工技术学会青年科技奖。


招收电机系统及其控制方向的博士、硕士研究生。

版权所有:沈阳工业大学电气工程学院  地址:沈阳经济技术开发区沈辽西路111号  电子邮箱:see@sut.edu.cn  联系电话:024-25496427